TC Electronic SENTRY NOISE GATE Multiband Noise-Gating Pedal with Hard-Gate Mode and Built-In TonePrints*

TC Electronic never disappoints. This pedal is a quality investment that, if used properly, will remove the noise due to pedals from your signal chain 100% of the time. It'll also take care of any noisy cables you put inside of its loop, but you should check for and resolve any issues with noisy cables in your rig before buying a noise gate. To use this pedal, wire your noisy pedals (typically distortion/overdrive/fuzz) into its send/return loop, use the dip switch to select your gate, and fine tune with the knobs. It took me less than a minute to dial in; here are my settings: 'Hiss' mode, "Threshold" at 10 o'clock, "Damp" at 1 o'clock, and "Decay" maxed out.A note about the available gates: 'Gate' is a digital noise gate modeled to behave like a traditional noise gate - Think ISP decimator. You will hear the pedal's gate when it engages in this mode, but you're supposed to. It's great for heavy metal/djent. 'Hiss' is TC's proprietary multi-band noise gate, capable of removing low-frequency noise (60 cycle hum from your pickups) and high-frequency noise (pedal hiss) from your signal at the same time. You won't hear the gate shutting in this mode, either - It's transparent yet extremely effective. It's really quite magical. No matter which mode you've dialed in, when the gate is off or the pedal is disengaged, the pedal will not color your tone at all thanks to TC's true bypass. No cheap Chinese buffer circuits here.However, the feature that puts this pedal a level of quality above the rest is TC's TonePrint. Let's say 'Gate' or 'Hiss' are not doing the trick for you. Perhaps you want a multi-band gate like 'Hiss' with a hard shut like 'Gate'. Maybe you can't find your gate's sweet spot without sacrificing your guitar's sustain. Or maybe you just cannot find the sweet spot at all. With TonePrint, you have access to a significant amount of parameters inside the pedal, beyond the 3 knobs on top. The options are quite limitless and will allow you customize the perfect noise gate for your rig.TL;DR: Have you removed all cable noise from your pedalboard, yet are still stuck with annoying hiss when you aren't playing? BUY THIS PEDAL.

Great noise gate. Very responsive. I have used in 4 cable method and it responds really good.

OK, I often search for a lower priced Chinese equivalent to save money on pedals, but they didn't have an equivalent and this had good reviews. I turned this on and it worked perfect! I thought something was wrong it worked so well - I clicked it off and there was the original loud hum!Realize this has a send/return loop which is why I got it, and if you want to cut out noise, this is the only way to do it. You need this up front to sense your raw signal and then use that to gate off the end of your effects chain. But typically, you want things like echo and reverb after this so when it shuts off, you hear a very nice trail off with the echo/reverb. Just dial it so it kicks on quick and dial it down so when you're at the point of no signal, it shuts off the back end (hiding the amplified noise from your other affects).I use a compressor, sometimes when I'm doing distorted leads and sometimes while playing slide. I first had the compressor right after this, but then I found I was missing the tail end and it cut off too soon (that is, my compressor was raising the level, but the noise gate didn't know that). So I put the compressor before this and all was good again. The compressor would hold my raw signal level high, the gate would remain open, and when the note totally faded away, the gate kicked in. I can do Strat single coils into compressor into super distortion with other affects and you'd never no it. Click it off and year that old awful hum. Now, silent bliss. Very cool and glad I paid a little extra for this.

You can do a lot to find the right ratio of gate to breathe of the guitar. Wish it had a “cut frequency” option but that’s a nitpick for someone with hot pickups.

I don't have a lot to say other than this pedal works great.

I use the pedal in the 4 cable method. The amp is completely silent. I leave the effects loop on and have a loop switch pedal to bring pedals in and out of the effects loop marshal DSL 20HR. I own an amazon noisegate, it broke, and a boss ns-2. The boss works but doesn't do the metal thrash gating. This pedal is incredible.

Don’t waste your time or money on the cheaper noise gate pedals. If you want zero noise then this is the way to go.

Great noise gate